Katool KT-CR2 Caster Kit

Hydraulic hose should be longer.

I bought two of the Katool 11,000 lb lifts and picked them up in Poole Georgia. Im glad I had a hydrolic flatbed trailer as they needed a crane to load these. I used roller Jack's to unload. MyGarage was great to work with as one lift was missing a safety catch bar and it arrived as I was assembling the other lift. I owned an 8,000 lb lift prior and thought it shouldn't be a problem putting these together alone. They are extremely heavy. The directions are terrible also. No mention of the plastic spacers that go on the bottom of safety bars, that it is quicker to insert the cables before bolting the platforms in so you don't have to take the pulleys out, and extending the hydrolic ram to give slack to bolt up cables. I used rachet straps and it worked perfectly. Outside of that, I took my time and used an AC hoist and a roll around jack as there was no way I was picking up those runways by myself. The first one was intimidating. No directions on the hydrolic fluid either but that was just pour in and run a few times to get the air out. Youtube explains the different types for your demographic. You'll need to get a 20amp 3 prong plug for them if you're going the 120 volt power. I found on Amazon for like 10 bucks. These lifts are extremely heavy duty lifts and outside the lack of directions, were an excellent purchase. I understand the reason for the high shipping cost due to the weight. Only complaint is the runways are not diamond plates as advertised and are smooth but not a deal breaker for me. Second lift went together much quicker. They support my Ram 3500 without an issue. Got them on Fathers day sale and cost less than an 8,000 lb lift. Again, MyGarage was great to work with and answered every email question I had. No, I have no affiliation with them and was not paid anything. Just a great purchase.

LIFT WAS JUST AS ORDERED,WORKS GREAT,SECOND ONE BOUGHT,WILL PURCHASE MORE IN THE FUTURE,THANKS

Extremely quick shipping

Well constructed and engineered lift. Assembly was straight-forward and the instructions were generally clear. One thing not clear was the narrow vs. wide spacing. There are no dimensions given for the two different settings, left to the reader to figure out. I installed it narrow, but will be changing to wide to accommodate different cars. The drip tray rails are a PITA to install with the cheap self-tapping screws, really need to be drilled and tapped or provide better screws. Very nice to be able to walk under it - I'm 5'11 and no issues with hitting my head. Lift speed is just fine with the 110v pump. I would not use it to work on a car, but it's really a great solution for a storage lift with no posts in the way in the shop!

Was missing a couple fitting called them ,talk to Ron, in customer service,he sent message to Jon in warehouse, Jon emailed me asked what was missing. Got email from Jon within 15 minutes.Told him what was missing,he asked for photos of machine, and sent the missing parts right away,got then right away next day. Thanks Ron and Jon great service!!! Hugh

I have been using the lift about 3 times a week average. Mostly with a 3400 pound RZR. However, I have used it on QX80, 4 door Fronteir and my Ram 4x4 4 door and it hasn’t struggled a bit.
The plant seems to chip easily and a few little quirks but definitely worth the money.
Still a little scary under it. Not sure how good of an install it is, since the installer was clueless and it was his first one!

Fast delivery machines work great, no complaints. Would recommend this place again

Installed a double car Triumph lift in my new garage. Garage was finished 4-2025 and lift installed by myself and friend within a week. Works just as smooth as my 2 car lift. Only had it for 3 months but very pleased with the quality and the ease of operation. Have room between the two lower cars to walk thru to rear of garage.

Great product, delivered on time, packaged extremely well

Great lift for the money! Easy assembly and surprisingly stable when bolted down. I can fit my 2002 GMC 1500hd pickup on the lift or under the lift if that helps you with the size. It’s a little slow lifting, but it’s not really intended for a production shop. So far it looks like it’ll do everything I need it to.

nice services and parts

I LOVE my new multi-use 36” Pro series cabinet and workbench! AMAZING quality for the price. Will last forever and couldn’t be happier!!!

I love the cabinets good quality dressed up my garage nice.

Received my cabinets on time. Items were well packaged, no damage. I'm impressed and could not be any happier with my new cabinets.