BendPak vs Advantage Lifts

BendPak vs Advantage Lifts - a comparison we see commercial shops and home garages alike struggle with. Both manufacturers make high-quality lifts, ranging from single-post to 2-post and even 4-post styles. Each has ALI-certified models that you can trust in your workflow.

So, which of these car lift brands is right for you? Our goal today is to help you find the ideal fit for your shop. My Garage Supplies is your one-stop shop for all the different types of car lifts, no matter your budget, garage layout, or the types of vehicles you service/store.

You can’t go wrong either way, as you’ll learn in this comparison of Advantage Lifts vs BendPak. But we don’t carry these lifts in our catalog, because we think they’re a bit overpriced relative to the value they bring to your shop. Instead, we carry manufacturers such as:

• Atlas
• AMGO
• Tuxedo
• Katool
• iDEAL
• Triumph

Learn more about picking the ideal lift for your garage below, be it a 2-post car lift, 4-post car lift, or single-post car lift. Or, get in touch with our customer service team for a personalized recommendation! 

BendPak vs Advantage Lifts at a Glance

Overview of Advantage Lifts

Advantage Lifts lives under the Real Garage Life umbrella, which consists of a few different brands specializing in automotive equipment. This particular brand has been manufacturing automotive lifts since 2010 with a clear goal: to build safer, heavier-built storage/service lifts than the imported models most shops settle for.

After several early iterations, the company settled on the design that became the 9000-HD - now their flagship ALI-certified residential 4-post lift. It features heavy-gauge steel, machined crossbeams, and mechanical ladder locks that engage at multiple height positions. Capacities range from 7,000lbs to 11,000lbs.

Advantage Lifts also offers 2-post lifts in either 10,000lbs or 12,000lbs weight capacities, along with motorcycle lifts and other specialty solutions for garages. 

All 9000-HD and 12K lifts are ALI certified, while the lighter models follow the same mechanical structure but are not listed under ALI testing. Most lifts can be equipped with bolt-on accessories like jack trays, drip pans, caster kits, and rolling bridge jacks for wheel-off work.

Advantage Lifts aren’t cheap, but you get what you pay for. Pricing starts around $5,995 for 4-post lifts, and 2-post lifts usually fall between $6,500 and $8,500. Your purchase is protected by a 5-year limited warranty, though. 

The company also offers installation instructions, maintenance guides, safety placards, and model-specific documentation with each lift to help you make the most of your investment. 

Overview of BendPak Lifts

BendPak has been building equipment for professional shops, dealerships, fleet operations, and advanced home garages for more than half a century now. 

The company offers a full ecosystem of lifts and shop equipment, much of which is ALI-certified. There’s a good chance you’ll find BendPak in any commercial automotive repair facility.

These lifts are crafted from single-piece steel columns, machined crossbeams, direct-drive hydraulic systems, and internal chain-over setups that keep both sides rising at the same rate. 

Every piece is put through a strict multi-stage surface prep before powder coating: washing, phosphate treatment, outgassing, masking, and an electrostatic powder application. Then, parts are baked at 400°F for roughly 45 minutes to cure the coating and ensure a consistent surface finish. You never have to worry about flaking.

Whether you’re looking for a 2-post lift vs 4-post lift, you’ll probably find that BendPak makes it in your preferred weight capacity. This is probably the broadest catalog in the entire industry:

• 2-post lifts from 9,000-18,000 lbs for full undercarriage service.
• 4-post lifts from 7,000-18,000 lbs for storage/service.
• Alignment lifts for wheel and suspension work.
• Low, mid, and full-rise scissor lifts up to 10,000 lbs.
• Parking lifts for stacking vehicles in limited space.
• Mobile column lifts that can handle up to 144,000 lbs when linked together.
• Portable QuickJack systems for track or home use.

Installation instructions, maintenance schedules, lifting-point guides, and safety placards ship with every lift. Your investment is backed by BendPak’s 5-2-1 warranty format: five years on structural components, two years on hydraulics, and one year on electrical parts.

BendPak lifts aren’t as expensive as you might assume, either. Entry 2-post lifts start around $3,895. That said, commercial systems can easily reach into the five-figure range.

Our blog has more resources comparing BendPak vs Atlas, Katool vs BendPak, and BendPak vs Rotary if you’re interested in exploring other options. But let’s take a closer look at BendPak vs Advantage Lifts below to help you narrow it down between these two brands. 

Advantage Lifts vs BendPak Lifts: Key Differences to Know

You can’t necessarily go wrong choosing between Advantage Lifts vs BendPak lifts. Both brands build high-quality systems for real shops, be it a commercial repair facility or a home garage. 

They ARE tailored to different use cases to some extent, though. We’ll show you which makes the most sense for you - if either - in this side-by-side comparison of BendPak vs Advantage Lifts, starting with build quality. 

Materials and Craftsmanship 

You’re getting a durable, dependable solution no matter your decision between Advantage Lifts vs BendPak lifts. But the lengths BendPak goes to in constructing its lifts are far greater than most other brands. 

BendPak uses single-piece steel columns, machined crossbeams, internal chain-over routing, and direct-drive hydraulics across its two-post lineup. All structural parts go through washing, phosphate treatment, outgassing, and baking at roughly 400°F before powder coating. 

Advantage Lifts does deserve credit itself, though. It builds wide-stance 4-post frames with heavy-gauge steel posts, cable-driven single-cylinder lift systems, and mechanical ladder locks. Even the Backyard Buddy lifts use a robust rectangular-post design. Each unit has machined crossbeams and bolt-on accessories for storage and routine service.

Safety Systems and Certification

Each manufacturer has its own lineup of ALI-certified lifts, which is non-negotiable if you’re outfitting a commercial facility. This guarantees compliance and safety.

BendPak also offers some ANSI-certified models across its 2-post and 4-post categories. Lifts also ship with safety placards, lifting-point guides, and installation documentation to help set you up for success.

Lift Types and Capacity Options

You’ll have way more options from BendPak than you would from Advantage Lifts. Here’s a quick overview of what’s available at BendPak:

• 2-post lifts from 9,0000-18,000 lbs
• 4-post lifts from 7,000-18,000 lbs
• Alignment racks, scissor lifts, parking lifts
• Mobile columns up to 144,000 lbs
• QuickJack portable systems

On the other hand, you’ll see a much thinner range of offerings from Advantage Lifts:

• 4-post lifts from 7,000-11,000 lbs
• 2-post lifts at 10,000 and 12,000 lbs
• Multi-Lift units in the 6,000-8,000 lb range

This isn’t necessarily a dealbreaker or a determining factor in choosing between BendPak vs Advantage Lifts. But if you have something really specific in mind, you’ll have better luck sourcing it from BendPak. 

Price and Overall Value For the Money

BendPak pricing starts at $3,895 for entry-level 2-post lifts but quickly climbs depending on capacity and certification. Meanwhile, Advantage Lifts start at $5,995 for the 9000-HD, with 2-post models and higher-capacity 4-post lifts often landing in the $6,500-$8,500 range.

You shouldn’t shop based on price alone - it’s value for the money that matters most, after all. In saying that, we think it’s hard to argue with the performance BendPak brings at a price that low.

Warranty, Customer Service, and Reputation

You’re going to get a warranty with either brand - the question is what’s covered, for how long, and whether or not getting support for your claim is straightforward or not.

BendPak is known for its 5-2-1 warranty (five years structural, two years hydraulic, one year electrical). The company has a reputation for taking care of its customers long after the initial sale, so you have nothing to worry about there.

In contrast, Advantage Lifts’ warranty terms vary from one model to the next. Some are backed by a 5-year warranty, other models are a bit more vague in terms of what’s protected and the duration. There’s just a bit more guesswork with this company. 

Lead Times and Availability

Now, there’s one final thing to consider in choosing between BendPak vs Advantage Lifts: what can you get access to in a timely manner? You probably don’t want to wait around weeks or months for your equipment to get installed.

BendPak has national distribution and generally ships quickly. Advantage Lifts is a bit more niche, but the company says you can expect your lift within 2 weeks from when your order is placed.

But here’s the thing about Advantage Lifts vs BendPak Lifts - we don’t carry either brand here at My Garage Supplies. We DO, however, stock a full lineup of trusted car lifts for garages of all types. We stand behind every make and model in our collection, so learn more below! 

How Do Other Car Lift Manufacturers Compare?

We know you came here to learn about BendPak vs Advantage Lifts, and these are two solid brands. But our focus at My Garage Supplies is to help our customers get the best bang for their buck, which is why we carry:

• Atlas
• Triumph
• AMGO
• KATOOL
• iDEAL
• Tuxedo
• And more!

These manufacturers deliver high-quality solutions at a price that fits your budget - starting at just $1,899! There are ALI-certified options, and everything we sell has been handpicked for quality and durability.

Our lifts are backed by strong warranties, too, so you can enjoy peace of mind when adding one of these to your garage. We also offer hassle-free financing options.

You can choose between symmetrical or asymmetrical arms, open-center or full-deck platforms, different runway lengths, and a wide spread of capacities. There’s a lift waiting for you in our catalog, and we’ll help you find it - just reach out for one-on-one support!

Bringing Our BendPak vs Advantage Lifts Comparison to a Close

That concludes our BendPak vs Advantage Lifts comparison. You should have a better idea of which best suits your needs at this point - or if it’s worth looking into other options. 

BendPak gives you a full range of commercial and residential systems, while Advantage Lifts is a bit more focused on the 4-post style - although they do have a few 2-post lifts. In general, you gain access to more options with BendPak, and at a lower price to boot.

But the brands we carry at My Garage Supplies make similar quality lifts at a much lower price. Why pay more for essentially the same thing? Shop now or connect with one of our experts for personalized guidance on picking the perfect car lift. Upgrade your shop’s workflow today!