Katool vs BendPak Car Lifts

Choosing between Katool vs BendPak car lifts comes down to what kind of garage you run and how much capacity you really need. Both are really respected in the industry, but they serve different users and budgets. We’re here to help you make the right decision for your shop.

BendPak makes premium, ALI-certified lifts for commercial applications. They’re manufactured from heavy steel with advanced hydraulics. They have really strong warranties, too. They’re not a bad pick, but 2-post lifts start at nearly $4,000.

On the other hand, Katool delivers impressive performance for far less. Their two-post and four-post lifts cover up to 15,000 lbs, but they start at under $2,000 - with stronger weight capacities than BendPak’s entry-level model!

Katool brings you the durability and functionality home and commercial garages need at a price that makes sense. This balance between affordability and performance is why Katool is one of the best car lift brands we carry at My Garage Supplies.

We stock the full 2-post car lift, 4-post car lift, and car scissor lift lineup from Katool, backed by world-class customer service and the lowest prices online. You also gain access to hassle-free financing. Get in touch today and we’ll help you find the ideal lift for your budget!

Fast Facts on Katool vs BendPak

Why We’re Proud to Stock Katool Car Lifts

Katool builds dependable, high-performing garage lifts that combine practicality with value. They’re designed for both residential users and commercial operators alike. 

You get the strength and reliability you’d expect from premium brands without the inflated price tag. The lifts are always made with durable steel construction and hydraulic systems for smooth, consistent performance for years to come.

Two-post models span 9,000-15,000 lbs, which is more than enough headroom for sedans, SUVs, and many half-ton trucks. Four-post lifts range from 8,500-15,000 lbs to accommodate your storage, detailing, and alignment needs. You can even find scissor lifts for tight bays and roll where a full frame won’t fit.

What sets Katool apart from other brands is how well the specs line up with typical garages. You’ll find base-plate and overhead two-post options to match ceiling height, with listed drive-through clearances under of roughly 85-95 inches and overall heights up to 145 inches.

Arms reach broadly across common lift points. There are automatic arm restraints and mechanical safety locks to keep vehicles secure on the rise, so you can enjoy peace of mind every time you use your lift. 

We recommend Katool for customers who want practical capacity, install-friendly dimensions, and pricing that leaves budget for tools and wheel service gear. These lifts represent some of the best value buys the industry has to offer, which is why we’re proud to stock Katool.

My Garage Supplies can help you get the right Katool model the first time - measured to your bay, your ceiling, and your workload. We’ll provide expert guidance, transparent pricing, and financing along the way, too. Get in touch today if you’re ready to take the next step!

All About BendPak Car Lifts

BendPak presents a pretty compelling case for any commercial shop looking for a new car lift to streamline productivity and ensure safety. The catalog leans a bit more industrial and rugged than some other brands, including Katool. That’s why you’ll see these lifts used most commonly in dealerships and fleet maintenance.

The company’s two-post, four-post, parking, and scissor lifts cover a range from 7,000 to 30,000 lbs, and most are ALI-certified, so you can rest assured you’re getting equipment made to strict safety and performance standards.

Two-post lifts like the XPR-10AS and XPR-12CL are constructed with heavy steel columns, precision hydraulics, and smooth synchronization. Meanwhile, four-post lifts such as the HDS series are long enough for wheelbase trucks and built with integrated runways and jack trays for alignment and undercarriage work. BendPak also has portable mid-rise/low-rise scissor lifts.

It’s hard to argue with the consistency and reputation BendPak is known for. The equipment is well-built, proven in commercial settings, and backed by extensive testing. But that pedigree comes at a premium, with entry-level lifts starting at roughly $3,895.

BendPak tends to cost a lot more than comparable midrange options. That’s just upfront. The installation requirements can add their own costs. These lifts typically need more slab depth and ceiling height than some smaller garages or home setups have. Retrofits can be expensive.

Our blog has a separate resource comparing the BendPak vs Atlas lift lineup if you want to see how other brands compare. Otherwise, it’s time we put Katool vs BendPak side-by-side below to help you narrow it down to one of these two industry-leading manufacturers.

Katool vs BendPak Car Lifts: Key Differences in Build, Capacity, Cost, and More

Katool and BendPak are two of the top brands the industry has to offer. You can’t go wrong with either car lift for garage. But there are important distinctions when you look closer at Katool vs BendPak, mainly in terms of value for the money. 

BendPak leans toward large commercial operations that are willing to pay more for certification, higher lift capacity, and dealer-grade features. In contrast, Katool caters to real-world garages - homeowners, small repair shops, and mechanics who need dependable, safe lifts at a fair price.

Here are the most important differences you need to know about Katool vs BendPak.

Construction and Materials

We want to be clear in saying both brands use high-quality materials and build lifts you can count on to last years, even with daily use. But there are some subtle nuances at play.

BendPak lifts are built with heavy-gauge, industrial steel and thicker columns. Many have oversized baseplates, high-strength cables, and precision hydraulic cylinders for smoother motion and tighter synchronization. They’re as good as it gets in terms of craftsmanship.

Katool’s construction philosophy focuses on strength-to-cost efficiency rather than just raw strength. The brand uses robust, high-grade steel in load-bearing sections without overbuilding non-critical components. 

You get clean welds, reinforced columns, and platforms coated for corrosion resistance with Katool lifts. All of this translates to a really long service life, but at a fraction of the cost and weight of a BendPak unit.

Lift Categories and Weight Capacities

Whether you’re looking for a 2-post lift vs 4-post lift or any other style, Katool and BendPak have a lift for you. BendPak has a really extensive catalog, spanning capacities from 7,000 to 30,000 lbs. That upper range is ideal for commercial fleets, but overkill for most shops.

On the other hand, Katool sits in a tighter range of 8,000-15,000 lbs, which covers the vehicles that most of your customers will bring in - or your own cars, for that matter. 

The Katool lineup includes base-plate and overhead two-post lifts, four-post lifts with alignment and rolling-jack options, and scissor lifts for smaller bays. You’re not paying for industrial capacity you’ll never use.

Installation, Footprint, and Space Requirements

You need to think about the space you’re installing a lift in when choosing between a Katool vs Bendpak car lift, too. 

BendPak equipment is engineered with commercial facilities in mind, so it typically requires 6” concrete slabs and ceiling clearances above 12’. That makes sense for dealerships and fleet shops, but maybe not home or hybrid garages. Many BendPak models are also heavier and more complex to install, which means more labor hours (and more cost).

Katool lifts are a bit more flexible. Two-post lifts can be installed on standard 4-6” slabs, and their drive-through clearances start under 90”. They accommodate a much wider range of garage layouts. 

Better yet, they’re more compact and easier to install. You might be able to handle it with your own internal resources rather than hiring a professional, saving money. Katool wins on practicality for a lot of people.

Safety Systems and Certification

BendPak carries ALI certification across most of its catalog, which is a huge selling point for commercial shops that need to stay compliant for OSHA or insurance purposes. Lifts are equipped with dual-synchro equalization systems, multi-point locking mechanisms, and redundant safety valves, too.

Now, Katool might not be ALI-certified - but its lifts do incorporate a lot of the same safety features nonetheless. That includes automatic arm restraints, dual mechanical locks, and hydraulic overload protection. 

There’s little difference between Katool vs BendPak in terms of day-to-day operation here. It’s just a difference in documentation, which matters for some shops. But other shops will see this as a way to save money without compromising on safety or performance, which is where Katool has an edge.

Warranty and Brand Support

BendPak backs its lifts with 5 to 10-year structural warranties and a 1-year parts/labor policy, along with a really strong US-based service network. The tradeoff is higher parts cost and slower lead times, since replacements usually go through dealer channels.

Katool provides multi-year structural coverage and straightforward warranty support through My Garage Supplies, though, which translates to faster turnaround and simpler communication. 

Our team offers sizing help, installation guidance, and post-sale support so you can rest assured your lift setup will run smoothly from day one. You can get in touch today to take the next step, but there’s one final thing we need to talk about pertaining to Katool vs BendPak.

Value for Money

There’s no denying BendPak quality - but you pay for it. A 10,000-lb two-post BendPak often retails above $5,000-$7,000, while a comparable Katool sells for $2,000-$3,000. Four-post lifts show similar gaps. 

The extra spend mainly covers certifications, extra steel thickness, and brand prestige. But at the end of the day, Katool offers a stronger ROI for most users. You get serious lifting capability, reliable safety systems, and professional performance without the financial strain.

In some cases, you might even be able to outfit multiple bays with Katool lifts for the cost of one BendPak lift. It’s hard to argue with that value for the money!

Closing Thoughts on Katool vs BendPak

That does it for our Katool vs BendPak comparison. Both brands build solid lifts, but Katool delivers the better fit for most real-world garages. You get the lifting power, safety, and durability you need without paying commercial-level prices or dealing with complex installs.

You can explore other brands we carry here at My Garage Supplies if you’d like, such as Titan vs Atlas lift. But the truth is, you really can’t go wrong with Katool from a value standpoint. So why not take the next step today? Connect with our experts for one-on-one support.