EZcarlift vs QuickJack: Which Portable Car Lift is Better?

The EZcarlift vs QuickJack decision is actually pretty interesting. Despite both being portable lifts, they’re not built the same way at all. We’re going to help you understand the nuances that matter most if you’re considering bringing one into your garage.

EZcarlift is an all-mechanical scissor design powered by a standard corded drill - no hydraulics, pumps, or fluid lines. QuickJack uses an electric-hydraulic system backed by BendPak, with ALI certification on most models and capacities up to 8,000 lbs. 

Same goal, very different engineering. But it’s worth considering a third option, too - an actual car lift for garage. This way, you can actually access the undercarriage of your car without lying on your back.

From portable car scissor lifts to full-fledged 2- and 4-post car lifts, there’s something for everyone at My Garage Supplies. Weigh your options below and start working smarter, not harder! 

Key Takeaways

• EZcarlift uses a drill-powered mechanical design with no hydraulic components. 
• QuickJack uses an electric-hydraulic system with a dedicated power unit.
• QuickJack models range from 3,500 to 8,000 lbs in capacity. EZcarlift tops out at 4,400 lbs.
• QuickJack's 6000 & 8000 series are ALI certified. EZcarlift doesn’t list certifications.
• EZcarlift reaches 26” of rise height. QuickJack models max out around 24-24.5”.
• Neither replaces the access and long-term value of a dedicated car lift. Consider upgrading to something more capable at My Garage Supplies, depending on the work you do.

Pros and Cons of EZcarlift

EZcarlift is all about simplifying access to your vehicle’s undercarriage, even though you still have to cram underneath the car on your back. It’s one of the easiest upgrades from a basic jack.

Pros:

• No hydraulic system means no fluid leaks, hoses, or pump maintenance
• 26-inch max rise height is the tallest in the portable lift category
• Roughly 153 lbs fully assembled (heaviest single piece is about 55 lbs)
• Runs on any 8+ amp corded drill you already own
• Made in the USA

Cons:

• Single model at 4,400 lbs rules out trucks and full-size SUVs
• No ALI certification or published third-party safety testing
• Warranty terms not listed on their website
• Full rise takes up to 90 seconds vs QuickJack's 30
• Requires a separate corded drill (not included)

Pros and Cons of QuickJack

You get a lot more versatility with a QuickJack compared to an EZcarlift. You also get more capability and assurance. The major trade-offs are less lift height and more maintenance.

Pros:

• Models from 3,500 to 8,000 lbs covers sports cars through light trucks
• ALI-certified on the 6000 and 8000 series
• Automatic mechanical safety locks at mid-rise and full-rise positions
• 30-second rise time to full height
• Built-in urethane wheels on every frame for repositioning
• Backed by BendPak, one of the biggest names in the lift industry

Cons:

• Heavier - the 8000TL is 98 lbs per frame with a 280 lb total shipping weight
• Hydraulic system means fluid, hoses, and fittings that need occasional attention
• Max rise of 24-24.5 inches is a little less clearance than EZcarlift
• Base warranty is 1 year (2-year extended costs extra)

EZcarlift vs QuickJack: Side-by-Side Comparison

Both solutions get your car a few feet off the ground so you can simplify oil changes and other routine vehicle maintenance in your garage. It just comes down to what exactly you’re lifting, your budget, and a few other factors. Here’s a quick EZcarlift vs QuickJack comparison:

Setup and Portability

EZcarlift breaks down into 4 sections (2 ramps + 2 cross spacers) and fits in a car trunk. Total assembled weight is under 153 lbs, with the heaviest piece at about 55 lbs. Width adjusts from 26 to 74”, so you can lift everything from a Miata to a full-width sedan. Stows at 4.5 inches tall and mounts to a wall with an optional hanger kit.

QuickJack's BL-3500SLX is the most portable model at 60 lbs per frame. It also fits in a trunk or backseat. The 6000TL and 8000TL weigh 78 and 98 lbs per frame, so moving those solo takes more effort. Every QuickJack frame has built-in urethane wheels for rolling into position, and wall hangers support vertical storage. Collapsed profiles range from 3 to 4 inches, depending on model.

But how you actually use the lifts is one of the biggest nuances between EZcarlift vs QuickJack. EZcarlift is pretty much a traditional vehicle lift in the sense that it plugs into a wall and relies on hydraulic fluid. Meanwhile, you’ll lift your vehicle using a drill if you go with a QuickJack.

Durability and Construction

EZcarlift uses a hybrid aluminum and steel build for the best of both worlds: aluminum for weight savings, steel for structural strength. The all-mechanical scissor design has fewer failure points since there are no hydraulic seals, hoses, or fluid to degrade over time.

QuickJack frames are all-steel with reinforced cross members and improved weld geometry on the newer TL and TLX models. That’s why these portable lifts are heavier than an  EZcarlift. 

The big difference here, though, is the hydraulic system. It’s more complex from a maintenance and repair perspective. Fluid levels, fitting integrity, and hose condition need periodic checks. That said, you’re getting faster, more consistent lifting with synchronized frame movement through a pressure-compensated flow divider. That might be worth it.

Lift Capacity and Safety Features

This is the most important practical gap in the EZcarlift vs QuickJack matchup. EZcarlift's 4,400 lb rating covers most sedans, coupes, and smaller crossovers, but it won't handle a full-size truck or heavy SUV. 

In contrast, QuickJack scales from 3,500 lbs on the BL-3500SLX up to 8,000 lbs on the 8000TL, which lets you raise everything from trucks and heavier project vehicles. You might have to go with QuickJack by default just based on what you’re trying to lift.

From a safety perspective, QuickJack's 6000 and 8000 series are ALI certified with automatic mechanical safety locks at both mid-rise and full-rise. EZcarlift doesn’t publish ALI certification or detail specific locking mechanisms on its website. Take that for what it’s worth.

Cost and Warranty

EZcarlift starts at $2,496 with $248 shipping - expect to pay at least $2,370 delivered. Warranty information isn't published on their site, so you'd need to contact them directly for terms.

Meanwhile, QuickJack starts at $1,775 for the BL-3500SLX and tops at $2,150 for the 8000TLX, with free shipping to the lower 48. Every model includes a 1-year warranty, and a 2-year extended option is available at purchase. 

Dollar for dollar, QuickJack stretches the budget further. But these are far from cheap, especially compared to a basic jack. Honestly, you’re paying around the same price you would for a full-fledged car lift - so is it worth exploring those as an alternative to EZcar lift or QuickJack?

Is it Worth Upgrading to a Full-Fledged Car Lift?

Portable lifts solve a real problem. They get your vehicle up without permanent installation. But they come with hard limits. 

Rise heights in the 21-26 inch range mean you're crouching or on a creeper for most jobs. 

Capacity tops out at 8,000 lbs.

 And none of them give you full walk-under clearance for exhaust work, transmission drops, or anything that demands real vertical space.

What if we told you that you could have the best of both worlds - real car lift capability with the portable features you need to make the most of limited garage space? 

Benefits of Garage Car Lifts

A dedicated 2-post car lift or 4-post car lift gives you over 72 inches of rise height, 9,000 to 15,000 lbs of capacity on most residential models, and full standing clearance underneath the vehicle. Faster work, better access, no more crawling around on a garage floor.

The best 4 post lift for home garage doubles as vehicle storage, too. Park one car on top, keep your floor space open underneath. A car scissor lift splits the difference between portability and permanent installation because some models deliver full-rise capability in a smaller footprint. 

There are more types of car lifts than most people realize, and the right one depends on your ceiling height, garage layout, and what kind of work you do. We can help you narrow it down today.

Find the Perfect Lift For Your Garage Today

Our 2-post lifts start at $1,899 - less than the portable units we’ve covered today! Yet, they can handle 9,000 to 15,000 lbs with full walk-under clearance. 

4-post models start at $2,699 with built-in vehicle storage. We're an authorized dealer for Atlas, Katool, AMGO, Triumph, and 30+ other brands, with free curbside shipping and a price match guarantee that beats competitors by $50 on orders over $2,000.

We stock all the top manufacturers backed by world-class customer service, even long after the sale. Take the next step today at My Garage Supplies and see what makes us the #1 choice online.

Wrapping Up Our EZCarLift vs QuickJack Comparison

After stacking up the EZcarlift vs QuickJack specs side by side, it’s probably time to make a choice. 

QuickJack brings more versatility, higher capacity, ALI certification, and BendPak's engineering behind it. EZcarlift is simpler, lifts a little higher, weighs less, and doesn’t need as much maintenance. Either gets the job done for light-duty work on sedans and smaller vehicles.

But, it's worth asking whether a permanent lift makes more sense if you're weighing an EZcarlift vs QuickJack and your budget is already in the $1,800-$2,500 range. The best lift brands in the industry are all available at prices that overlap with the portable options you're comparing.

Our team is available at (307) 381-1810 or Sales@MyGarageSupplies.com to help you figure out what fits. Get in touch and let’s figure it out together.

More Lift Comparisons You May Be Interested in

Rotary vs BendPak | BendPak vs Atlas | AMGO vs Atlas | Mayflower vs Katool

Frequently Asked Questions

How long can a car stay on a QuickJack?

Indefinitely, as long as the mechanical safety locks are engaged. The locks hold the load without relying on hydraulic pressure, so there's no risk of the lift bleeding down over time. Just confirm the locks are fully seated before walking away.

Is QuickJack safer than jack stands?

Generally, yes. QuickJack's platform-style frames support the vehicle along its length rather than at single pinch points, and the automatic safety locks remove the human error involved in positioning stands. ALI-certified models meet industry safety standards that jack stands aren't tested against.

What is the best portable car lift jack?

Choosing between an EZcarlift vs QuickJack depends on what you're lifting. EZcarlift is fine for vehicles under 4,400 lbs if you want to avoid hydraulic maintenance. QuickJack's 6000TL or 8000TL is hard to beat for heavier vehicles. But if your budget overlaps with permanent lift pricing, a full-size garage lift gives you more access and capacity for similar money.