The Stratus SAE-MS9000XT is a commercial-grade, 9,000-lb capacity mid-rise scissor lift built for shops that service a wide mix of cars, light trucks, and vans. Its open-center design leaves the area beneath the vehicle clear, so brakes, exhaust, suspension, tires, and general undercar work stay within easy reach instead of being blocked by a crossbar or center frame.
Two features set this model apart from a standard mid-rise: it is extra-wide to support a broader footprint of vehicles, and it is extra-tall, reaching a maximum platform height of 47 1/4". That added rise lets a technician work seated or standing with real clearance rather than crouching at knee height. Nine mechanical lock positions hold the platforms securely from 18 3/4" up to 45 1/2", and an electric safety lock release drops all locks together at the press of a button.
Because it rides on an included mobile kit, the MS9000XT rolls between bays or out of the way when the floor is needed for something else. A dual-cylinder structure with anti-surge valves keeps the two runways level under load, and a built-in 24V low-voltage control system runs the raise, lower, and lock-release functions.
Like any vehicle lift, the MS9000XT must operate on a sound concrete floor. The manufacturer specifies a minimum of 6 inches of reinforced concrete rated for 3,000 PSI and cured at least 28 days. The lift ships in two pieces — the platform assembly and the freestanding control console — and moves by freight; the receiving shop arranges offloading, and MGS confirms delivery details and any regional freight surcharges at the time of order.
Features
+-
Open-center mid-rise design — no center obstruction, for full undercar access to brakes, exhaust, and suspension
Extra-wide, extra-tall — maximum platform height of 47 1/4" for genuine working clearance
9 lock positions — mechanical safety locks from 18 3/4" to 45 1/2"
Electric safety lock release — releases all locks together from the control console
Dual-cylinder structure with anti-surge valves — keeps the platforms level under load
24V low-voltage control system with a programmable logic controller (PLC)
Available in 110V or 220V — a 3 HP single-phase motor
Self-lubricated bushings and bearings
Included mobile kit — reposition the lift without disassembly
Operator controls: disconnect, key switch, emergency stop, and start button.
What's Included
+-
Four 1-3/8" rubber pads
Four 2-3/8" rubber pads
Four drive-on ramps
Mobile kit for repositioning the lift
Optional accessories, sold separately: a 4" platform extension, a support bar, and a set of four low-profile approach ramps for low-clearance vehicles.
Specifications
+-
Stratus SAE-MS9000XT Specifications
Model
SAE-MS9000XT
Capacity
9,000 lbs
Maximum lifting height
47 1/4" (1,200 mm)
Minimum height
4 3/4" (121 mm)
Lock positions
9 (18 3/4" to 45 1/2")
Lifting time
Approx. 40 seconds
Platform length (without ramps)
62 5/8" (1,590 mm)
Platform length (with ramps)
86" (2,190 mm)
Overall width
76 3/4" (1,943 mm)
Width between platforms
35 13/16" (911 mm)
Runway width
20 1/2" (519 mm)
Motor
3 HP, 110V / 220V, 60 Hz, single-phase
Recommended breaker
20A (110V) / 30A (220V)
Hydraulic oil
AW32 or AW46
Sound level
Up to 75 dB
Platform shipping weight
1,318 lbs
Platform shipping dimensions
69" L × 79" W × 11" H
Control console shipping weight
132 lbs
Control console shipping dimensions
38" L × 17" W × 23" H
The lift ships as two freight packages: the platform assembly and the freestanding control console.
Warranty
+-
Stratus backs the SAE-MS9000XT with a 5-year warranty on the lifting structure, a 3-year warranty on hydraulic components, and a 2-year warranty on electrical components. Coverage assumes the lift is installed, operated, and maintained per the manufacturer's manual; unauthorized modification voids the warranty.
FAQ
+-
What concrete does the lift require?
The manufacturer specifies a minimum of 6 inches of reinforced concrete rated for 3,000 PSI and cured at least 28 days before installation.
What electrical service does it need?
The 3 HP motor runs on 110V or 220V single-phase, 60 Hz power. A 30A breaker is recommended for a 220V supply (20A for 110V). The lift does not ship with a power plug — a 220–250V, 30A plug is required. The power cord reaches about 11 feet.
Can I adjust the lowering speed?
Yes. The hydraulic oil-flow valve controls speed — turning it clockwise slows the lift, and counter-clockwise speeds it up.
How do I lower the lift if it is stuck in the air?
Release the mechanical safety locks, then release the pressure in the hydraulic system, as described in the manual.
Does it need anything before the first lift?
Yes. The manual directs you to raise the lift to its highest point and lower it fully two to three times without a load to bleed air from the hydraulic hoses and cylinders before lifting a vehicle.
Welcome to My Garage Supplies! We're here to assist you in your journey to find the best garage-related products. Please explore the sections below to find answers to common questions you might have.
Swipe to see more
What happens after I place an order?
Upon placing an order, you will receive a confirmation email. If the item is in stock, we will typically ship it within five business days.
Missing Tracking Email?
Our products typically ship within 5 business days. You will receive tracking information once your order has shipped. If you have not received a tracking email after 5 business days, please reach out to us at support@mygaragesupplies.com or via our Contact Us page for assistance.
Shipping Time Guarantees
Unfortunately, we cannot guarantee shipping times, as they are subject to change. Shipping estimates provided are approximate. Please consider this when placing orders with specific delivery date expectations.
What is your return policy?
We are dedicated to your satisfaction. If you are not completely satisfied with your order, please reach out to us immediately. We will work with you to arrange an exchange, replacement, or refund within 14 days of your purchase. For brand-specific return policies, please check the Product Page.
Damaged or Defective Items
If your order arrives damaged, we will do everything we can to assist. We may arrange for replacement parts or redelivery as necessary.
Where to Find the Full Return Policy?
You can find our complete Shipping & Return Policy at the bottom of our website, which provides in-depth information on our return procedures and policies.
Is there a shipping fee?
Free shipping is included on most orders within the continental United States. Some oversized items like vehicle lifts or large cabinet systems may incur additional freight charges.
Can I track my order?
Absolutely! Once your order is placed, our carriers will provide us with tracking information as soon as your items are shipped. You will receive an email notification containing your order's tracking details.
What should I consider before making a purchase?
Before placing an order, it's crucial to ensure that the dimensions and size of the garage equipment you're interested in are compatible with the available space in your garage. My Garage Supplies cannot be held responsible if the dimensions do not align with your space.
Additional Considerations
It's also advisable to carefully review the specifications of the items you intend to purchase. If you have any questions or need further assistance, please do not hesitate to reach out to us via email or live chat. We're here to assist you in making informed decisions.
What should I expect after placing an order?
Once your order is placed, you will receive a confirmation email. We will charge your payment method to initiate order processing and preparation for shipment.
Shipping Timeframes
Shipping times vary depending on the item ordered. Some items may be available in stock and ship within 24 hours, while others may take up to approximately five business days. You will receive a tracking number within 24 hours of shipment.
Inspecting Your Delivery
Upon receiving your order, please inspect the packaging for any signs of damage. If you notice any damage, be sure to take pictures of the damaged packages before opening them and report the issue to us within five days of delivery. If the damage is attributed to the carrier, they will be responsible for resolving it at no cost to you.
Missing Parts or Damaged Deliveries
Always check the contents of your delivery upon receipt. If you find that the delivery is damaged or missing parts, please send us pictures of the damage, along with your order number, to support@mygaragesupplies.com. We will then contact our suppliers to facilitate the replacement of damaged items.
Tracking Information
If you do not receive a tracking number within a few days of placing your order, please contact us to ensure that we have the correct email address on file. We are committed to keeping you updated on shipping information.
Are you an authorized dealer for your products?
Yes, we are proud to be authorized dealers for the brands we support. Please see our list of trusted brands in the Brands section in the main menu.
What is your privacy policy?
To understand how we handle your personal information, please review our comprehensive Privacy Policy available in the Privacy section of our website.
Can't find what you're looking for? Our team is here to help.
