Auxx-Lift 400 lbs Motorized Garage Storage Platform

The Auxx-Lift is the only safety-tested storage lift and comes with redundant safety features. EASY Installation on Joists & Rafters. Incl. remote

Get plenty of storage space and move your most frustrating clutter out of the way. The garage Storage lift lets you easily store and access storage items in your garage. Our motorized garage storage lift is a great addition. Best valued lift.

Strength in numbers ?

Includes:

• Master Remote
• Keychain remote
• C-channel support beams
• 4 by 8 platform
• Silver motor shelves
• Attractive grey-silver finish
• Uses vinyl coated steel cables (rated a total of 7200 lb load capacity)

Requires a 110V/120V outlet (Garage door opener, etc.) - power cord is 12 ft.

• Get more space and park your car
• Ideal for storing keepsakes, hobby - and sport gear items
• Stores up to 400 lb fast, safely and easily
• Beautify your home (Requires 5'x8' install area)
• Accommodates up to 13 ft. high ceilings
• No lifting or ladders
• 3/16 Steel aircraft cables with a 7200 lb working load
• C-Channel beams, Spax-Lag Screws
• Incl. Phone support and step-by-step instructions
• Our platform's hanging height from the ceiling is 1 ft. (Competitor's is 3-4 ft.)

Safety Features:

• No heavy lifting: Eliminate the safety hazard of reaching up to grab heavy items. Per OSHA, fall from ladders is a major source of injury both on and off the job. A fall from any height even one or two feet could cause serious injuries such as bone fractures and head injuries.

• Self-leveling Platform: Differential motor technology automatically adjust the weight distribution throughout to keep platform nearly level even with heavy asymmetrically loading. The controller monitors weight on the platform and will prevent you from lifting/lowering items.

• Tested to UL-Standards: Auxx-Lift is the only lift that has been tested to the highest UL-Standard requirements with all components having a minimum Factor of Safety of 4x

Wirelessly controlled

The Auxx-Lift comes with an easy to use wireless remote control allowing you to lower/raise your platform from a safe distance.

• Auto High & Low Points: Programmable stopping points allow you to set high and low point parameters, prevent your items hitting the ceiling or floor.

• Auto-Stop: Lift will automatically stop in scenarios where remote control loses connection or runs out of battery.

• Active-Press: Button to move platform needs to be continuously pressed to avoid accidental damage or injury.

General specs

• Model: Auxx-Lift 1400
• Lifting Capacity: Up to 400 lbs
• Max. Travel Distance: 16 ft
• Min. stored height: 8 in

Roof Support

• Type: (2) 1 5/8" x 60" strut channel
• Fasteners: (8) 5/16" x 4" SPAX Lag Bolts
• Mounting Area: 5' x 5' over 3 joists/rafters
• Cable: 1/8 Vinyl-coated Steel 7x19
• Cable Strength: 2,000 lbs

Operating Requirements

• Switch Voltage: 110V / 120V
• Transmitter: 433.92 MHz
• Electrical Cord: 10 FT / 16 gauge / NEMA 5-15
• Min. circuit size :15 amp

Platform Specs

• Thickness: 2.5 inches
• Support Frame: C-Channels (15gauge)
• Face material: 3 x 3 galv. Wire Mesh (4gauge)

Motors

• Type: IP44 (T-Motor)
• Rated Power: 235 W
• Rated Current: 2.2 A
• Voltage / Phase: 100-120V AC / Single
• Duty Cycle @ Max. Capacity: 3 min on, 15 min off4

Size and Weight

• Dimensions: 3ft x 6ft, 3ft x 8ft, 4ft x 6ft, 4ft x 8ft
• Weight: 128 pounds

What are the benefits of the Auxx-Lift's design?

The Auxx-lift was designed to provide maximum storage, safety, convenience and a strikingly attractive design. We also eliminated the shortcomings of similar storage products such as low-quality components and safety issues. We use C-Channel beams and 1/4" wire mesh (on the platform).

What are the platform lifter's electrical requirements?

It runs on standard US household power. The motor draws approximately 3.8 Amps. The 12 ft. long power cord can be plugged into the outlets placed in the ceiling for garage door openers or any other outlet.

What is the installation like?

The mounting frame area on the ceiling that is required is 5

How is the unit installed in relation to the joists?

The Auxx-Lift has ceiling mounting struts that are installed across 3 garage ceiling's joists or ceiling supports (The long 8 ft. side is perpendicular to the joists). The storage platform for garages is installed to at least 3 ceilings supports for extra redundancy. If you want the platform lifter installed running with the joists you can purchase an extra hardware kit from our store.

What is the max. travel distance?

The auxx-lift comes standard for floor-to-ceiling heights of up to 13 ft. We offer longer cables to accommodate up to 20 ft. floor-to-ceiling heights.

How much clearance do I need above the garage door?

The minimum recommended clearance is 18 in between the garage door and the ceiling.

Installation Guide

Following tools are needed:

• Wrench set - 13/32", 7/16", 23/32" - 10mm, 11mm, 18mm
• Flathead Screw driver 0.04"x0.1" - 1x3mm
• Phillips #1 Screw driver
• Allen Wrench - 3/16", 3/32" - 5mm, 2.5mm
• Level
• Tape measure
• Pencil
• Drill
• 7/16" - 11mm socket for drill
• Drill bit - 1/8", 3/16", 9/32" - 3mm, 5mm, 7mm
• Stud finder
• Line laser (Optional)
• Digital Multimeter (Optional)