{"product_id":"triumph-nt-16-16-000-lb-two-post-lift","title":"Triumph NT-16 16,000 lb Two Post Auto Lift","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTriumph NT-16\u003c\/strong\u003e is a \u003cstrong\u003e16,000-lb floor-plate two-post auto lift\u003c\/strong\u003e built for full-time shop use on full-size trucks, vans, and heavy SUVs. The columns connect at the floor with a low-profile drive-over plate, so there is no overhead bar to drop ceiling clearance — useful in shops with bays under nine feet of headroom where an overhead-bar lift would not fit.\u003c\/p\u003e\n\u003cp\u003eLifting is handled by \u003cstrong\u003edual hydraulic chain-assist cylinders\u003c\/strong\u003e built to ANSI standards with NOK oil seals, paired with self-lubricating UHMW polyethylene sliders and bronze bushings on the carriage. Four symmetric arms swing under the vehicle on telescoping inner and outer sections, finished with rubber lift pads and a stackable adapter set in 1.5-inch, 3-inch, and 6-inch heights for trucks and SUVs that need extra reach. A single-point safety release with dual safety design holds the lift on lock, and an electrical override automatic safety shut-off cuts power if the carriage hits an out-of-range condition.\u003c\/p\u003e\n\u003cp\u003eThe NT-16 lifts from a 7-inch lowered height to a maximum lifting height of 72 inches in 40 seconds, on a 220V AC single-phase circuit driving a 3 HP motor. Both \u003cstrong\u003eISO 9001\u003c\/strong\u003e manufacturing and \u003cstrong\u003eCE\u003c\/strong\u003e conformity are stated by the supplier. The lift ships freight with truck adapters and mounting hardware included; the standard \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e applies.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e16,000-lb lifting capacity\u003c\/strong\u003e for full-size trucks, vans, and heavy SUVs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFloor-plate (base-plate) design\u003c\/strong\u003e — no overhead bar; suits shops with limited ceiling height\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual hydraulic chain-assist cylinders\u003c\/strong\u003e, built to ANSI standards with NOK oil seals\u003c\/li\u003e\n  \u003cli\u003eSelf-lubricating UHMW polyethylene sliders and bronze bushings on the carriage\u003c\/li\u003e\n  \u003cli\u003eSymmetric four-arm configuration with telescoping inner and outer sections\u003c\/li\u003e\n  \u003cli\u003eStackable rubber-pad adapter set: 1.5-inch, 3-inch, and 6-inch extensions for SUVs and trucks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-point safety release\u003c\/strong\u003e with dual safety design\u003c\/li\u003e\n  \u003cli\u003eElectrical override with automatic safety shut-off\u003c\/li\u003e\n  \u003cli\u003e40-second lift time on a 220V AC, 3 HP single-phase power unit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO 9001 manufacturing\u003c\/strong\u003e and \u003cstrong\u003eCE\u003c\/strong\u003e conformity stated by Triumph\u003c\/li\u003e\n  \u003cli\u003eTruck adapters and mounting hardware included at no extra charge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cfigure\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-nt-16-16-000-lb-two-post-lift-dimensions.webp?v=1778765441\" alt=\"Triumph NT-16 two-post lift dimensions diagram: 120-inch overall height, 142-inch overall width, 114-inch between posts, 100-inch drive-through, 7- to 72-inch lift range, 32- to 49.25-inch arm reach.\"\u003e\n  \u003cfigcaption\u003eNT-16 dimensions per Triumph: 120\" overall height, 142\" overall width, 114\" between posts, 100\" drive-through, 7\"–72\" lift range, 32\"–49.25\" arm reach.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo columns (power side and offside) with floor-plate connecting bar\u003c\/li\u003e\n  \u003cli\u003eHydraulic power unit (220V AC, 3 HP, single-phase)\u003c\/li\u003e\n  \u003cli\u003eFour symmetric lifting arms with rubber lift pads\u003c\/li\u003e\n  \u003cli\u003eStackable adapter set: 1.5-inch, 3-inch, and 6-inch extensions\u003c\/li\u003e\n  \u003cli\u003eTruck adapters\u003c\/li\u003e\n  \u003cli\u003eMounting hardware (anchor bolts, washers, nuts)\u003c\/li\u003e\n  \u003cli\u003eHydraulic hoses and synchronizing cables\u003c\/li\u003e\n  \u003cli\u003eProduct manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\u003cth colspan=\"2\"\u003eTriumph NT-16 Specifications\u003c\/th\u003e\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLifting capacity\u003c\/td\u003e\n\u003ctd\u003e16,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLifting height (max)\u003c\/td\u003e\n\u003ctd\u003e72\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLowered height\u003c\/td\u003e\n\u003ctd\u003e7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eLift time\u003c\/td\u003e\n\u003ctd\u003e40 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOverall height\u003c\/td\u003e\n\u003ctd\u003e120\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOverall width\u003c\/td\u003e\n\u003ctd\u003e142\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDistance between posts\u003c\/td\u003e\n\u003ctd\u003e114\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDrive-through width\u003c\/td\u003e\n\u003ctd\u003e100\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eArm reach (min–max)\u003c\/td\u003e\n\u003ctd\u003e32\" – 49.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBase plate size\u003c\/td\u003e\n\u003ctd\u003e20\" × 20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e220V AC, 3 HP, single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eArm configuration\u003c\/td\u003e\n\u003ctd\u003eSymmetric\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eTruck adapters\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e2,000 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eISO 9001, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eConcrete requirement\u003c\/td\u003e\n\u003ctd\u003e3,000 PSI minimum, 6\" minimum thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cem\u003eInstalls on a level, cured concrete floor that meets the spec above. Confirm your electrical service (220V AC single-phase, 30-amp breaker, 10-gauge wire minimum) before purchase.\u003c\/em\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003eThe Triumph NT-16 ships with a \u003cstrong\u003e1-year parts warranty\u003c\/strong\u003e. Defective parts are replaced within the warranty period; labor, freight, and consumables are not covered. Contact \u003ca href=\"mailto:sales@mygaragesupplies.com\"\u003esales@mygaragesupplies.com\u003c\/a\u003e or call \u003ca href=\"tel:+13073811810\"\u003e307-381-1810\u003c\/a\u003e to start a warranty claim.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill the NT-16 fit in a shop with a low ceiling?\u003c\/h3\u003e\n\u003cp\u003eThe lift itself measures 120 inches (10 feet) at its overall height, and the floor-plate design has no overhead bar above the columns. The ceiling needs to clear the columns plus the height of the tallest vehicle being raised to the working position — plan ceiling height accordingly.\u003c\/p\u003e\n\n\u003ch3\u003eSymmetric or asymmetric arms?\u003c\/h3\u003e\n\u003cp\u003eSymmetric. All four arms are the same length, and the columns face each other directly. This puts the vehicle centered between the columns rather than offset toward the driver-side door, which is the asymmetric pattern.\u003c\/p\u003e\n\n\u003ch3\u003eWhat electrical service is required?\u003c\/h3\u003e\n\u003cp\u003eThe 3 HP power unit runs on 220V AC, single-phase. The manual lists a 30-amp breaker and minimum 10-gauge wire as the recommended electrical service. Confirm your shop has a dedicated 220V single-phase circuit available before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eIs professional installation required?\u003c\/h3\u003e\n\u003cp\u003eTriumph provides the mounting hardware and a product manual covering layout, anchor-bolt installation, hydraulic hook-up, cable adjustment, and test run. Many shop owners install in-house with a helper; installation by a third-party contractor is also common. MGS does not include installation in the base price.\u003c\/p\u003e\n\n\u003ch3\u003eHow is the lift delivered?\u003c\/h3\u003e\n\u003cp\u003eThe NT-16 ships freight on an LTL common carrier on a 48-foot semi truck. \u003cstrong\u003eYou are responsible for unloading the lift from the truck\u003c\/strong\u003e — the driver will not unload it for you, and lift-gate service is not available for auto lifts. Plan for a forklift, Bobcat, tractor, tow truck, or backhoe at the receiving location. If you cannot unload at your location, MGS can ship to the carrier's nearest freight terminal for pickup with a trailer or moving van. You are responsible for scheduling the delivery appointment with the freight company.\u003c\/p\u003e\n\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-nt-16-16-000-lb-two-post-lift-manual.pdf?v=1778765444\" target=\"_blank\" rel=\"noopener noreferrer\" aria-label=\"Download the Triumph NT-16 product manual PDF, opens in new tab\"\u003eTriumph NT-16 Product Manual (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Triumph","offers":[{"title":"Default Title","offer_id":48144006971678,"sku":"NT-16","price":5525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/5550\/0318\/files\/triumph-nt-16-16-000-lb-two-post-lift-hero.webp?v=1778768272","url":"https:\/\/mygaragesupplies.com\/products\/triumph-nt-16-16-000-lb-two-post-lift","provider":"My Garage Supplies","version":"1.0","type":"link"}